From:Dave,
GridJumper@aol.com
69 Chevy Corvet-Stingray (No Smog Needed).
350/350 W/custom glass. Blue Plate "1TNTVET" Calf.
Needs a Front-Clip and Head lights. Good shape. No mayger crashs.
With two moters, Rear spindal tools, some parts. Am/Fm W/Boster,
P/W, T-top, Tildon Hydrolic cluch. New parts
Trade 4 Machine equip. Good Lathe, Band/Chop Saw, Surface Gndr,
CNC-Mill, Tooling. Lathe needed most. All or one. Needs Fixing, maybe ok.
714-748-4398
From:Don Campbell,
mfimdjc@yahoo.com
1973 Clausing lathe. Model 5914 12in. X 52in. 1.38 in.
spindle bore. Quick change box for thread cutting 4
thru 192 t.p.i. 3 jaw chuck. 5c collet set. #3 morse
taper chuck for tailstock. Chip-cabinet stand.
Flame hardened double V bed no visible wear. Lathe
looks, runs good. $2,600.
Also have the service and parts manuals. Posted 12-7-00
From:Jon Hodson,
HodsonBigdaddy@aol.com
CNC lathe, Upgrade Technologies Compact GT27, 5hp 4000 rpm 5C
spindle,1" bar cap., Fagor 8025 control, 1997 model, approx. 100 hrs on
machine. $32,500.00
CNC mill, Milltronics Partner 1-J VMC, 25x X 16y X 20z travels, Centurion V
PC control, 7.5 hp heavy duty CAT 40 spindle, 12" x 40" table, assortment of
spindle tooling. 1995 model, approx 2000 hrs on machine,
$41,000.00
Call Jon Hodson (503) 538-1215
From:Bob Burroughs,
PowerWagon2@webtv.net
Mitu 0-6 outside mikes carb 1-10 wood box, Mitu 0-3 dpth wood
box,
Scheer-Tumico 1 1/2 to 10 Inside wood box. All New. All 3 for
$450.00.
From:C. R. Pettus, crpettus@mindspring.com
Lathes from 9" X 24" to 26" X 54", South Bend, Rockwell, Clausing,
Hendy, Cincinnati Lathe & Tool
Shapers, 7" to 24" stroke, South Bend,
Logan, Atlas, Delta Milwaukee, G & E, Rockford, Havir
Vertical band saws,
20" Powermatic, 20" Rockwell, 24" Grob, 26" Powermatic
Tool & Cutter
Grinders, Covel, P & W; Hendy 24" stroke Planer
Antique Mills and Shapers
6K, 5C, 3C, Collets, Jacobs RubberFlex collet attachments with collets
Collet Draw Bars
Emco V10-P Lathe & Vert Mill Combination
Steady rests, Follow rests
other items
Randall Pettus, 706 265-1902
From:Tim McManus, timm@pccweb.com
Four(4), 8" rotary Cross-Slide Indexing tables. Used for a very short
time in a non machine shop environment. Paid $600+ each.
Make offer:
Tim McManus
PCC 414-251-3000 ext. 271
From:Rick Logsdon, webmaster@machinetools.com
The following machines are to be sold as quickly as possible:
Hitachi Seiki HT 25 w/10TF Control
Defum 44" VTL, Single Ram Turret, Side Head
HN 50, 10 Station Pallet Shuttle
Matsuura VMC 1000VS, MX1 Control, Mint
Fanamation Camero CNC Coordinate Measuring Machine, 100" x 40" x40"
Acme Screw Machines: 9/16 6 - 3 1/2 6 Spindle
Hurco MB1 w/BX Control, No ATC
Hurco KMB1 w/BX Control
1995 Leadwell MCV1000, Fanuc OM Control
2 ea. LeBlond Makino MC1213's w/RGV System, Absolutely Mint!
96" x 30' Noble & Lund Engine Lathe
Ingersoll Rand Liquid Cooled 100 hp Air Compressor
817-589-7862 Phone
From:Greg Smith, gsmith@lagc.com
Dumore Series 57 Tool Post Grinder. 3/4hp, with internal spindle (18"
depth), insert spindle (3 inserts, internal and external), all with
wheels/collars. Used once. Cost $4,100. Sell $2,600 OBO.
From:Don Speice,sparro@ids.net
Tru-X Gage/Workstop for 6" Kurt type milling vises. Unique 3-axis
movement eliminates time consuming indicating and edgefinding between
setups.E-mail for more info and price. See Don at sparro@ids.net
From: Dennis Hrehor, nyseg@spectra.net
From:
l+lkie@gj.net
I have aquired a Stepto Shaper that I have restored and have working
now. Does any have any Info. on Shapers. Like books or an operators
manual on a Stepto Shaper.
Thanks
From:Don Campbell,
mfimdjc@yahoo.com
1973 Clausing lathe. Model 5914 12in. X 52in. 1.38 in.
spindle bore. Quick change box for thread cutting 4
thru 192 t.p.i. 3 jaw chuck. 5c collet set. #3 morse
taper chuck for tailstock. Chip-cabinet stand.
Flame hardened double V bed no visible wear. Lathe
looks, runs good. $2,600.
Also have the service and parts manuals. Posted 12-7-00
From:Jon Hodson,
HodsonBigdaddy@aol.com
CNC lathe, Upgrade Technologies Compact GT27, 5hp 4000 rpm 5C
spindle,1" bar cap., Fagor 8025 control, 1997 model, approx. 100 hrs on
machine. $32,500.00
CNC mill, Milltronics Partner 1-J VMC, 25x X 16y X 20z travels, Centurion V
PC control, 7.5 hp heavy duty CAT 40 spindle, 12" x 40" table, assortment of
spindle tooling. 1995 model, approx 2000 hrs on machine,
$41,000.00
Call Jon Hodson (503) 538-1215
From:Bob Burroughs,
PowerWagon2@webtv.net
Mitu 0-6 outside mikes carb 1-10 wood box, Mitu 0-3 dpth wood
box,
Scheer-Tumico 1 1/2 to 10 Inside wood box. All New. All 3 for
$450.00.
From:C. R. Pettus, crpettus@mindspring.com
Lathes from 9" X 24" to 26" X 54", South Bend, Rockwell, Clausing,
Hendy, Cincinnati Lathe & Tool
Shapers, 7" to 24" stroke, South Bend,
Logan, Atlas, Delta Milwaukee, G & E, Rockford, Havir
Vertical band saws,
20" Powermatic, 20" Rockwell, 24" Grob, 26" Powermatic
Tool & Cutter
Grinders, Covel, P & W; Hendy 24" stroke Planer
Antique Mills and Shapers
6K, 5C, 3C, Collets, Jacobs RubberFlex collet attachments with collets
Collet Draw Bars
Emco V10-P Lathe & Vert Mill Combination
Steady rests, Follow rests
other items
Randall Pettus, 706 265-1902
From:Tim McManus, timm@pccweb.com
Four(4), 8" rotary Cross-Slide Indexing tables. Used for a very short
time in a non machine shop environment. Paid $600+ each.
Make offer:
Tim McManus
PCC 414-251-3000 ext. 271
From:Rick Logsdon, webmaster@machinetools.com
The following machines are to be sold as quickly as possible:
Hitachi Seiki HT 25 w/10TF Control
Defum 44" VTL, Single Ram Turret, Side Head
HN 50, 10 Station Pallet Shuttle
Matsuura VMC 1000VS, MX1 Control, Mint
Fanamation Camero CNC Coordinate Measuring Machine, 100" x 40" x40"
Acme Screw Machines: 9/16 6 - 3 1/2 6 Spindle
Hurco MB1 w/BX Control, No ATC
Hurco KMB1 w/BX Control
1995 Leadwell MCV1000, Fanuc OM Control
2 ea. LeBlond Makino MC1213's w/RGV System, Absolutely Mint!
96" x 30' Noble & Lund Engine Lathe
Ingersoll Rand Liquid Cooled 100 hp Air Compressor
817-589-7862 Phone
From:Greg Smith, gsmith@lagc.com
Dumore Series 57 Tool Post Grinder. 3/4hp, with internal spindle (18"
depth), insert spindle (3 inserts, internal and external), all with
wheels/collars. Used once. Cost $4,100. Sell $2,600 OBO.
From:Don Speice,sparro@ids.net
Tru-X Gage/Workstop for 6" Kurt type milling vises. Unique 3-axis
movement eliminates time consuming indicating and edgefinding between
setups.E-mail for more info and price. See Don at sparro@ids.net
From: Dennis Hrehor, nyseg@spectra.net
From:
l+lkie@gj.net
I have aquired a Stepto Shaper that I have restored and have working
now. Does any have any Info. on Shapers. Like books or an operators
manual on a Stepto Shaper.
Thanks
Also have the service and parts manuals. Posted 12-7-00
From:Jon Hodson,
HodsonBigdaddy@aol.com
CNC lathe, Upgrade Technologies Compact GT27, 5hp 4000 rpm 5C
spindle,1" bar cap., Fagor 8025 control, 1997 model, approx. 100 hrs on
machine. $32,500.00
CNC mill, Milltronics Partner 1-J VMC, 25x X 16y X 20z travels, Centurion V
PC control, 7.5 hp heavy duty CAT 40 spindle, 12" x 40" table, assortment of
spindle tooling. 1995 model, approx 2000 hrs on machine,
$41,000.00
Call Jon Hodson (503) 538-1215
From:Bob Burroughs,
PowerWagon2@webtv.net
Mitu 0-6 outside mikes carb 1-10 wood box, Mitu 0-3 dpth wood
box,
Scheer-Tumico 1 1/2 to 10 Inside wood box. All New. All 3 for
$450.00.
From:C. R. Pettus, crpettus@mindspring.com
Lathes from 9" X 24" to 26" X 54", South Bend, Rockwell, Clausing,
Hendy, Cincinnati Lathe & Tool
Shapers, 7" to 24" stroke, South Bend,
Logan, Atlas, Delta Milwaukee, G & E, Rockford, Havir
Vertical band saws,
20" Powermatic, 20" Rockwell, 24" Grob, 26" Powermatic
Tool & Cutter
Grinders, Covel, P & W; Hendy 24" stroke Planer
Antique Mills and Shapers
6K, 5C, 3C, Collets, Jacobs RubberFlex collet attachments with collets
Collet Draw Bars
Emco V10-P Lathe & Vert Mill Combination
Steady rests, Follow rests
other items
Randall Pettus, 706 265-1902
From:Tim McManus, timm@pccweb.com
Four(4), 8" rotary Cross-Slide Indexing tables. Used for a very short
time in a non machine shop environment. Paid $600+ each.
Make offer:
Tim McManus
PCC 414-251-3000 ext. 271
From:Rick Logsdon, webmaster@machinetools.com
The following machines are to be sold as quickly as possible:
Hitachi Seiki HT 25 w/10TF Control
Defum 44" VTL, Single Ram Turret, Side Head
HN 50, 10 Station Pallet Shuttle
Matsuura VMC 1000VS, MX1 Control, Mint
Fanamation Camero CNC Coordinate Measuring Machine, 100" x 40" x40"
Acme Screw Machines: 9/16 6 - 3 1/2 6 Spindle
Hurco MB1 w/BX Control, No ATC
Hurco KMB1 w/BX Control
1995 Leadwell MCV1000, Fanuc OM Control
2 ea. LeBlond Makino MC1213's w/RGV System, Absolutely Mint!
96" x 30' Noble & Lund Engine Lathe
Ingersoll Rand Liquid Cooled 100 hp Air Compressor
817-589-7862 Phone
From:Greg Smith, gsmith@lagc.com
Dumore Series 57 Tool Post Grinder. 3/4hp, with internal spindle (18"
depth), insert spindle (3 inserts, internal and external), all with
wheels/collars. Used once. Cost $4,100. Sell $2,600 OBO.
From:Don Speice,sparro@ids.net
Tru-X Gage/Workstop for 6" Kurt type milling vises. Unique 3-axis
movement eliminates time consuming indicating and edgefinding between
setups.E-mail for more info and price. See Don at sparro@ids.net
From: Dennis Hrehor, nyseg@spectra.net
From:
l+lkie@gj.net
I have aquired a Stepto Shaper that I have restored and have working
now. Does any have any Info. on Shapers. Like books or an operators
manual on a Stepto Shaper.
Thanks
CNC mill, Milltronics Partner 1-J VMC, 25x X 16y X 20z travels, Centurion V PC control, 7.5 hp heavy duty CAT 40 spindle, 12" x 40" table, assortment of spindle tooling. 1995 model, approx 2000 hrs on machine, $41,000.00
Call Jon Hodson (503) 538-1215
From:Bob Burroughs,
PowerWagon2@webtv.net
Mitu 0-6 outside mikes carb 1-10 wood box, Mitu 0-3 dpth wood
box,
Scheer-Tumico 1 1/2 to 10 Inside wood box. All New. All 3 for
$450.00.
From:C. R. Pettus, crpettus@mindspring.com
Lathes from 9" X 24" to 26" X 54", South Bend, Rockwell, Clausing,
Hendy, Cincinnati Lathe & Tool
Shapers, 7" to 24" stroke, South Bend,
Logan, Atlas, Delta Milwaukee, G & E, Rockford, Havir
Vertical band saws,
20" Powermatic, 20" Rockwell, 24" Grob, 26" Powermatic
Tool & Cutter
Grinders, Covel, P & W; Hendy 24" stroke Planer
Antique Mills and Shapers
6K, 5C, 3C, Collets, Jacobs RubberFlex collet attachments with collets
Collet Draw Bars
Emco V10-P Lathe & Vert Mill Combination
Steady rests, Follow rests
other items
Randall Pettus, 706 265-1902
From:Tim McManus, timm@pccweb.com
Four(4), 8" rotary Cross-Slide Indexing tables. Used for a very short
time in a non machine shop environment. Paid $600+ each.
Make offer:
Tim McManus
PCC 414-251-3000 ext. 271
From:Rick Logsdon, webmaster@machinetools.com
The following machines are to be sold as quickly as possible:
Hitachi Seiki HT 25 w/10TF Control
Defum 44" VTL, Single Ram Turret, Side Head
HN 50, 10 Station Pallet Shuttle
Matsuura VMC 1000VS, MX1 Control, Mint
Fanamation Camero CNC Coordinate Measuring Machine, 100" x 40" x40"
Acme Screw Machines: 9/16 6 - 3 1/2 6 Spindle
Hurco MB1 w/BX Control, No ATC
Hurco KMB1 w/BX Control
1995 Leadwell MCV1000, Fanuc OM Control
2 ea. LeBlond Makino MC1213's w/RGV System, Absolutely Mint!
96" x 30' Noble & Lund Engine Lathe
Ingersoll Rand Liquid Cooled 100 hp Air Compressor
817-589-7862 Phone
From:Greg Smith, gsmith@lagc.com
Dumore Series 57 Tool Post Grinder. 3/4hp, with internal spindle (18"
depth), insert spindle (3 inserts, internal and external), all with
wheels/collars. Used once. Cost $4,100. Sell $2,600 OBO.
From:Don Speice,sparro@ids.net
Tru-X Gage/Workstop for 6" Kurt type milling vises. Unique 3-axis
movement eliminates time consuming indicating and edgefinding between
setups.E-mail for more info and price. See Don at sparro@ids.net
From: Dennis Hrehor, nyseg@spectra.net
From:
l+lkie@gj.net
I have aquired a Stepto Shaper that I have restored and have working
now. Does any have any Info. on Shapers. Like books or an operators
manual on a Stepto Shaper.
Thanks
Scheer-Tumico 1 1/2 to 10 Inside wood box. All New. All 3 for $450.00.
From:C. R. Pettus, crpettus@mindspring.com
Lathes from 9" X 24" to 26" X 54", South Bend, Rockwell, Clausing,
Hendy, Cincinnati Lathe & Tool
Shapers, 7" to 24" stroke, South Bend,
Logan, Atlas, Delta Milwaukee, G & E, Rockford, Havir
Vertical band saws,
20" Powermatic, 20" Rockwell, 24" Grob, 26" Powermatic
Tool & Cutter
Grinders, Covel, P & W; Hendy 24" stroke Planer
Antique Mills and Shapers
6K, 5C, 3C, Collets, Jacobs RubberFlex collet attachments with collets
Collet Draw Bars
Emco V10-P Lathe & Vert Mill Combination
Steady rests, Follow rests
other items
Randall Pettus, 706 265-1902
From:Tim McManus, timm@pccweb.com
Four(4), 8" rotary Cross-Slide Indexing tables. Used for a very short
time in a non machine shop environment. Paid $600+ each.
Make offer:
Tim McManus
PCC 414-251-3000 ext. 271
From:Rick Logsdon, webmaster@machinetools.com
The following machines are to be sold as quickly as possible:
Hitachi Seiki HT 25 w/10TF Control
Defum 44" VTL, Single Ram Turret, Side Head
HN 50, 10 Station Pallet Shuttle
Matsuura VMC 1000VS, MX1 Control, Mint
Fanamation Camero CNC Coordinate Measuring Machine, 100" x 40" x40"
Acme Screw Machines: 9/16 6 - 3 1/2 6 Spindle
Hurco MB1 w/BX Control, No ATC
Hurco KMB1 w/BX Control
1995 Leadwell MCV1000, Fanuc OM Control
2 ea. LeBlond Makino MC1213's w/RGV System, Absolutely Mint!
96" x 30' Noble & Lund Engine Lathe
Ingersoll Rand Liquid Cooled 100 hp Air Compressor
817-589-7862 Phone
From:Greg Smith, gsmith@lagc.com
Dumore Series 57 Tool Post Grinder. 3/4hp, with internal spindle (18"
depth), insert spindle (3 inserts, internal and external), all with
wheels/collars. Used once. Cost $4,100. Sell $2,600 OBO.
From:Don Speice,sparro@ids.net
Tru-X Gage/Workstop for 6" Kurt type milling vises. Unique 3-axis
movement eliminates time consuming indicating and edgefinding between
setups.E-mail for more info and price. See Don at sparro@ids.net
From: Dennis Hrehor, nyseg@spectra.net
From:
l+lkie@gj.net
I have aquired a Stepto Shaper that I have restored and have working
now. Does any have any Info. on Shapers. Like books or an operators
manual on a Stepto Shaper.
Thanks
Shapers, 7" to 24" stroke, South Bend, Logan, Atlas, Delta Milwaukee, G & E, Rockford, Havir
Vertical band saws, 20" Powermatic, 20" Rockwell, 24" Grob, 26" Powermatic
Tool & Cutter Grinders, Covel, P & W; Hendy 24" stroke Planer
Antique Mills and Shapers
6K, 5C, 3C, Collets, Jacobs RubberFlex collet attachments with collets
Collet Draw Bars
Emco V10-P Lathe & Vert Mill Combination
Steady rests, Follow rests
other items
Randall Pettus, 706 265-1902
From:Tim McManus, timm@pccweb.com
Four(4), 8" rotary Cross-Slide Indexing tables. Used for a very short
time in a non machine shop environment. Paid $600+ each.
Make offer:
Tim McManus
PCC 414-251-3000 ext. 271
From:Rick Logsdon, webmaster@machinetools.com
The following machines are to be sold as quickly as possible:
Hitachi Seiki HT 25 w/10TF Control
Defum 44" VTL, Single Ram Turret, Side Head
HN 50, 10 Station Pallet Shuttle
Matsuura VMC 1000VS, MX1 Control, Mint
Fanamation Camero CNC Coordinate Measuring Machine, 100" x 40" x40"
Acme Screw Machines: 9/16 6 - 3 1/2 6 Spindle
Hurco MB1 w/BX Control, No ATC
Hurco KMB1 w/BX Control
1995 Leadwell MCV1000, Fanuc OM Control
2 ea. LeBlond Makino MC1213's w/RGV System, Absolutely Mint!
96" x 30' Noble & Lund Engine Lathe
Ingersoll Rand Liquid Cooled 100 hp Air Compressor
817-589-7862 Phone
From:Greg Smith, gsmith@lagc.com
Dumore Series 57 Tool Post Grinder. 3/4hp, with internal spindle (18"
depth), insert spindle (3 inserts, internal and external), all with
wheels/collars. Used once. Cost $4,100. Sell $2,600 OBO.
From:Don Speice,sparro@ids.net
Tru-X Gage/Workstop for 6" Kurt type milling vises. Unique 3-axis
movement eliminates time consuming indicating and edgefinding between
setups.E-mail for more info and price. See Don at sparro@ids.net
From: Dennis Hrehor, nyseg@spectra.net
From:
l+lkie@gj.net
I have aquired a Stepto Shaper that I have restored and have working
now. Does any have any Info. on Shapers. Like books or an operators
manual on a Stepto Shaper.
Thanks
Make offer: Tim McManus PCC 414-251-3000 ext. 271
From:Rick Logsdon, webmaster@machinetools.com
The following machines are to be sold as quickly as possible:
Hitachi Seiki HT 25 w/10TF Control
Defum 44" VTL, Single Ram Turret, Side Head
HN 50, 10 Station Pallet Shuttle
Matsuura VMC 1000VS, MX1 Control, Mint
Fanamation Camero CNC Coordinate Measuring Machine, 100" x 40" x40"
Acme Screw Machines: 9/16 6 - 3 1/2 6 Spindle
Hurco MB1 w/BX Control, No ATC
Hurco KMB1 w/BX Control
1995 Leadwell MCV1000, Fanuc OM Control
2 ea. LeBlond Makino MC1213's w/RGV System, Absolutely Mint!
96" x 30' Noble & Lund Engine Lathe
Ingersoll Rand Liquid Cooled 100 hp Air Compressor
817-589-7862 Phone
From:Greg Smith, gsmith@lagc.com
Dumore Series 57 Tool Post Grinder. 3/4hp, with internal spindle (18"
depth), insert spindle (3 inserts, internal and external), all with
wheels/collars. Used once. Cost $4,100. Sell $2,600 OBO.
From:Don Speice,sparro@ids.net
Tru-X Gage/Workstop for 6" Kurt type milling vises. Unique 3-axis
movement eliminates time consuming indicating and edgefinding between
setups.E-mail for more info and price. See Don at sparro@ids.net
From: Dennis Hrehor, nyseg@spectra.net
From:
l+lkie@gj.net
I have aquired a Stepto Shaper that I have restored and have working
now. Does any have any Info. on Shapers. Like books or an operators
manual on a Stepto Shaper.
Thanks
Hitachi Seiki HT 25 w/10TF Control Defum 44" VTL, Single Ram Turret, Side Head HN 50, 10 Station Pallet Shuttle
Matsuura VMC 1000VS, MX1 Control, Mint
Fanamation Camero CNC Coordinate Measuring Machine, 100" x 40" x40"
Acme Screw Machines: 9/16 6 - 3 1/2 6 Spindle
Hurco MB1 w/BX Control, No ATC
Hurco KMB1 w/BX Control
1995 Leadwell MCV1000, Fanuc OM Control
2 ea. LeBlond Makino MC1213's w/RGV System, Absolutely Mint!
96" x 30' Noble & Lund Engine Lathe
Ingersoll Rand Liquid Cooled 100 hp Air Compressor
817-589-7862 Phone
From:Greg Smith, gsmith@lagc.com
Dumore Series 57 Tool Post Grinder. 3/4hp, with internal spindle (18"
depth), insert spindle (3 inserts, internal and external), all with
wheels/collars. Used once. Cost $4,100. Sell $2,600 OBO.
From:Don Speice,sparro@ids.net
Tru-X Gage/Workstop for 6" Kurt type milling vises. Unique 3-axis
movement eliminates time consuming indicating and edgefinding between
setups.E-mail for more info and price. See Don at sparro@ids.net
From: Dennis Hrehor, nyseg@spectra.net
From:
l+lkie@gj.net
I have aquired a Stepto Shaper that I have restored and have working
now. Does any have any Info. on Shapers. Like books or an operators
manual on a Stepto Shaper.
Thanks
From:Don Speice,sparro@ids.net
Tru-X Gage/Workstop for 6" Kurt type milling vises. Unique 3-axis
movement eliminates time consuming indicating and edgefinding between
setups.E-mail for more info and price. See Don at sparro@ids.net
From: Dennis Hrehor, nyseg@spectra.net
From:
l+lkie@gj.net
I have aquired a Stepto Shaper that I have restored and have working
now. Does any have any Info. on Shapers. Like books or an operators
manual on a Stepto Shaper.
Thanks
From: Dennis Hrehor, nyseg@spectra.net
From: l+lkie@gj.net
I have aquired a Stepto Shaper that I have restored and have working now. Does any have any Info. on Shapers. Like books or an operators manual on a Stepto Shaper. Thanks